To cover your building with a fully impermeable and not breathable materials is similar  to protect yourself from atmospheric conditions by wearing nylon clothing. But after a time you notice that you can‘ t breath in this clothes. It is  same for buildings. Insulation is not just for  cut or reduce relations with the external environment. It is a main  obligation to prevent formation of excessive moisture in buildings and not to put a barrier in front of  extrior walls for the air flow in insulating phase of the project. Leave a space between the insulation and exterior wall of the building can not be a complete solution of the problem as well, also it may creats a occupation of  undesirable guests such as insects, insect, lizard, centipede etc. In addition, some special cases, it may need  to be created second, stronger and higher costed construction .

Properties of the material used for insulation of a building block to have the air circulation, or to allow it to arrange structure is the basic rule of insulation.Such as  rock and glass wool fiber insulation  materials don’t prevent air circulation. In this sense,it would not be incorrect to say  the fiber products are ideal insulating materials. In addition, this type of materials also make acoustic noise insulation.

However, fibrous materials which presented to the market are not used alone. They must be used with other additional materials. Fibrous insulation materials are used  between two rows of brick or with gypsum panels, fiber cement board, plates etc. vertically and  must be connected to the surface by mechanical means and can be used horizontally between the wooden profiles. This application results in significant volume loss and increased labor costs in buildings. In other words additional materials both, more or less bring.weight and the additional financial burden.

Styronit for your building

It is an undeniable fact that natural metarials have direct relation between health and aesthetic of human life. In this sense, our ability to use natural materials is important in the living places. The basic requirement of for habitable structure is being made by using natural materials from the basement to the roof. Styronit structure contains natural ingredients. The use of styronit in  living  places is important and indispensable in terms of health and aesthetic view.

styronit contains special treated natural fibers, natural porous organic and inorganic materials. styronit is a water-based, light, ready-to-use mortar. Without special training styronit can easily be applied all over the world.

Styronit, turns to a plate with its interlaminar coalecence forces while adhering strongly onto the surface it is applied and taking the shape of it. In other words styronit forms a board as big as the area it covers.
Investigations show that thermal bridges can be as much as 20% or more if the insulation boards are not applied properly which  proves that insulation without joints & edges is important.

Being natural styronit has a stable character which is not affected by heat changes and does not crack. It also covers the cracks formed earlier on the surfaces easily. Styronit’s surface can be patterned (like forms of brick, stone, etc.) easily while still wet. It can be painted after dried.

Styronit has capilarities which is enough for heat & sound insulation. Styronit has λh value of 0.04 – 0.05 W/mK depending onto the product type. It can be applied on any type of surface known.

Styronit has a density value of as low as 250 kg/m³ which classifies it as a light building material which is an important feature for regions where earthquake is unavoidable. 

‘’styronit does not load both your budget and your building‘’